API Cement Testing Laboratory Equipment
Constant Speed Mixer (Model 3260)
High-speed cement slurry blender compliant with API mixing procedures.
- Speed range: 1,000–18,000 RPM
- Speed control: Programmable push buttons
- Compliance: API 10A / 10B mixing procedures
shwetank.krishna@unileoben.ac.at
+4338424023008
Pressurized Fluid Density Scale
Measures slurry density under pressure to minimize entrapped air and improve accuracy.
Density range: 52–164 lb/ft³, 6.9–21.9 ppg
shwetank.krishna@unileoben.ac.at
+4338424023008
Viscometer
Determines rheological properties of cement slurries at atmospheric pressure over a wide shear rate range.
- Operating temperature: 41°F–104°F
- Operating speeds: 12 manual speeds from 1–600 RPM
- Shear rate accuracy: ±0.01 RPM
- Slurry container volume: 350 mL
- Test RPM sequence: 3, 6, 30, 60, 100, 200, 300 RPM
shwetank.krishna@unileoben.ac.at
+4338424023008
Stirred Fluid Loss Apparatus (Model 7120)
Performs stirred fluid loss testing of cement slurries under high-pressure and high-temperature conditions.
- Operating temperature: 41°F–450°F
- Maximum pressure: 2,000 psi
- Paddle speed: 150 RPM
- Slurry container volume: ~500 mL
- Filtrate container volume: ~100 mL
- Standards: API 10A, ISO 10426
shwetank.krishna@unileoben.ac.at
+4338424023008
Circular Cement Expansion Mold Kit
Measures bulk shrinkage or expansion of cement compositions during curing.
- Measurement type: Bulk expansion / shrinkage
- Standards: API RP 10B-5, ISO 10426-5:2004
shwetank.krishna@unileoben.ac.at
+4338424023008
Atmospheric Consistometer (Model 1200)
Conditions freshly mixed cement slurry by applying controlled shear history prior to testing, ensuring representative slurry behavior.
- Measurement range: 0–100 Bc
- Operating conditions: 50°F–120°F
- Maximum temperature: 200°F
- Slurry container volume: 470 mL
- Container rotational speed: 150 RPM
shwetank.krishna@unileoben.ac.at
+4338424023008
Single-Cell HPHT Consistometer (Model 8330)
Measures cement thickening behavior under high temperature and pressure, closely simulating downhole conditions.
- Maximum temperature: 600°F
- Maximum pressure: 30,000 psi
- Slurry container speed: 150 RPM
- Viscosity range: 0–100 Bc
- Pressurizing medium: White mineral oil
shwetank.krishna@unileoben.ac.at
+4338424023008
Water Bath (Model WTB11)
Cures cement samples at constant temperature under atmospheric conditions.
- Temperature range: 50°F–212°F
- Liquid level range: 40–164 mm
shwetank.krishna@unileoben.ac.at
+4338424023008
Pressurized Curing Chamber (Model 1910)
Cures cement samples under high-pressure, high-temperature conditions prior to mechanical or ultrasonic testing.
- Pressure range: 0–25,000 psi
- Temperature range: 34°F–700°F
shwetank.krishna@unileoben.ac.at
+4338424023008
Compression Testing Machine (Quasar 200 - Galdabini)
Determines mechanical properties of cement, providing continuous stress–strain measurement.
- Maximum load: 200 kN
- Power rating: 3,000 W
- Output: Continuous stress vs. strain visualization
- Standards: ISO 7500-1, ASTM E4, EN 10002-2, JIS B7721, GB/T 16825.1, DIN 51221, BS 1610
shwetank.krishna@unileoben.ac.at
+4338424023008